CHEMICAL INDUSTRY
Chemicals and their derivatives widely used in our daily life. The chemical industry is among the most diversified industrial sectors and includes basic chemicals and its derivatives, petrochemicals, fertilizers, paints, gases, food, pharmaceuticals, dyes, etc. The sector covers over 70,000 commercial products, and provides the feedstock to many downstream industries such as finished drugs, dyestuffs, paper, synthetic rubber, plastics, polyester, paints, pesticides, food, fertilizers and detergents.
We have supply our products to chemical industries which help them to achieve proper mixing to get desire product. Some of uses of our products listed below.
Static Mixer:
- Dispersing immiscible liquids in washing and extraction operations
- Mix gases with air in front of catalytic reactors such as in the production of Nitric Acid
- Dissolve gases into liquids such as NH3, SO2, Cl2
- Mixing of Active ingredients at molecular level.
- Heat and Cool viscous materials
Jet Mixer / Tank Mixing Eductor / Eductor Jet Mixer:
- Blending effluent containing Glycol on Pharmaceutical process.
- Neutralization mixing duties using Phosphoric, Hydrochloric and Sulphuric acids on Water treatment.
- Homogenization of epoxy liquid in Paint production Mixing of Food products including Wine, Soft drinks, sauces etc.
- The Jet Mixer is used for mixing in beer fermenters. Applying forced mixing in beer fermenters reduces processing times by up to 30%.
- The mixers are used for different beverage applications such as mixing beverages containing fruit pulp, dissolving flavours, aspartame and other powders and for tank cleaning - cleaning in place (CIP) .
- The Jet Mixer can be used for effective deaeration. Minimizing the oxygen content in liquid food products like soft drinks, beer and edible oil leads to extended shelf life and improved taste stability.
In-Line Eductor:
- Draining sumps
- Pumping in areas where an electric pump would present an explosion hazard.
- Pulling an acid or base into a water stream for dilution purposes.
- To inject air, ozone, chlorine or other gas into a process liquid.
- To create Vacuums
- Acid Alkali dilution
- Mixing of Fluids
- Scrubbing of flue gas
- Pumping or exhausting gases using an existing gas, steam or liquid supply.
Agitator :
- Mixing and blending of Various fluids in the chemical Industry
- To enhance heat transfer in the chemical industry
- Blending of two or more miscible liquids
- Agitation of fluid to enhance heat transfer between fluid and a coil or jacket in the vessel wall.
- Dispersion of gas in a liquid.
- Liquid –liquid dispersion such as pigment in solvents.
- Suspending of fine solid particles in a liquid, as in catalytic hydrogenation of a liquid.
- Mixing of high viscosity liquids
- Dissolution / Dilution / Homogenization of Soluble Powders or Liquids
- Emulsion of Immiscible Liquids
- Slurry Mixing
- Equalization & Neutralization
Plastic Products:
- Storage Tanks.
- Piping system for corrosive fluids.
- Stacks and Ducting.
- Lining system
- Scrubber and Filters.
EPC INDUSTRY
Engineering, Procurement, and Construction (EPC) is a particular form of contracting arrangement used in some industries where the EPC Contractor is made responsible for all the activities from design, procurement, construction, to commissioning and handover of the project to the End-User or Owner. Clients with large, complex industrial projects choose the Engineer-Procure-Construct (EPC) method when they require a single entity to deliver a project to turnkey status.
We have registered with known Engineering Consultant and EPC contractors to supply them our Products listed below,
- Static Mixer:
- Jet Mixer / Tank Mixing Eductor / Eductor Jet Mixer:
- In-Line Eductor:
- Agitator :
- Plastic Products:
OIL & GAS INDUSTRY
Oil and natural gas touch our lives in countless ways every day. Together, they supply more than 60 percent of our nation’s energy. They fuel our cars, heat our homes and cook our food.
With rising global energy demand, the oil and gas industry has a wide range of challenges and opportunities across the upstream, midstream, downstream and oilfield services sectors. We have supply our product to Oil and Gas industry which help them in following Operations.
- Bitumen Processing
- Desalting crude oil.
- Blending of crude oil to give uniform feed to refinery
- Blending additives into lubricating oil, gasoline, fuel oil
- Mix steam and Methane feed to reformer
- Contact, used lubricating Oil with sulfuric acid for waste oil regeneration.
- Dispersing immiscible liquids in washing and extraction operations
- Mix gases with air in front of catalytic reactors such as in the production of Nitric Acid
- Dissolve gases into liquids such as NH3, SO2, Cl2
- Mix Reactive materials in short length.
Static Mixer:
- Mixing in large storage tanks of fuel i.e. Furnace oil,Diesel,Petrol
- Mix steam and Methane feed to reformer
- The mixers are used for different beverage applications such as mixing beverages containing fruit pulp, dissolving flavours, aspartame and other powders and for tank cleaning - cleaning in place (CIP) .
- The Rotary Jet Mixer can be used for effective deaeration. Minimizing the oxygen content in liquid food products like soft drinks, beer and edible oil leads to extended shelf life and improved taste stability.
Jet Mixer / Tank Mixing Eductor / Eductor Jet Mixer:
- Draining sumps
- Pumping in areas where an electric pump would present an explosion hazard.
- Pulling an acid or base into a water stream for dilution purposes.
- To aerate a liquid to reduce the BOD (Basic Oxygen Demand) of the fluid.
- To exhaust vapors or gas from a room.
- To evacuate a vessel.
- To inject air, ozone, chlorine or other gas into a process liquid.
- To create Vacuums
- Activated Sludge treatment
- Nitification/Denitirification
- Homogenization of tank
- Acid Alkali dilution
- Mixing of Fluids
- Extraction
- Scrubbing of flue gas
- Gas evacuation
- Pumping or exhausting gases using an existing gas, steam or liquid supply.
In-Line Eductor:
- Mixing oil- based mud.
- Mixing of water-based mud
- Well Bore Cement Mixers
- Homogenization of Water in Crude Oil Custody Transfer Lines/LACT
- Oil Storage/BS&W
- Oil Sands Mixers
- Natural Gas (CO2 Reduction)
- Gasoline Blending
- Alkylation
Agitator :
- Pipe and Pipe system
- Ductwork and Ductwork system
- Water and fuel storage Tank and vessel.
FRP/GRE Pipe and Vessel:
OTHER INDUSTRIES
We have supplied our products to various other Industries, some of the are listed below,
- Power Plants
- Pharmaceuticals
- Cosmetics and Detergents
- Minerals and Ore Processing
- Shipping Industry
- Cement Industry
- Steel Industry
- Agrochemical Industry
- Food Industry
- Polymer Industry
Distinct Uses of our Products in the above Industries is listed below.
- Heat and Cool viscous materials
- Blend fruit juice concentrates
- Add CO2 to fruit juices, wine, beer, etc.
- Dilute concentrates
- Heating and cooling chocolate
STATIC MIXER:-
- Mix corrosive/hazardous waste on Effluent treatment plants.
- Blending effluent containing Glycol on Pharmaceutical process
- Homogenization of epoxy liquid in Paint production Mixing of Food products including Wine, Soft drinks, sauces etc.
- The Rotary Jet Mixer is used for mixing in beer fermenters. Applying forced mixing in beer fermenters reduces processing times by up to 30%.
JET MIXER:-
- Mixing and blending of Various fluids in the chemical Industry
- To enhance heat transfer in the chemical industry
- Mixing of high viscosity liquids
- Dissolution / Dilution / Homogenization of Soluble Powders or Liquids
- Emulsion of Immiscible Liquids
- Rapid Mixing
- Slurry Mixing
- Polymer Addition
- Flocculation
AGITATOR:
WATER TREATMENT INDUSTRY
Clean, safe water is vital for everyday life. Water is essential for health, hygiene and the productivity of our community. Water treatment is a process of making water suitable for its application or returning its natural state. Thus, water treatment required before and after its application.
Water treatment involves science, engineering, business, and art. The treatment may include mechanical, physical, biological, and chemical methods. As with any technology, science is the foundation, and engineering makes sure that the technology works as designed.
We have supply our product to Oil and Gas industry which help them in every step of treatment to achieve processes like Coagulation, flocculation, sedimentation, Disinfection and Ph correction.
Static Mixer:
- pH control of waste water with acids/bases
- Flocculants dilution and addition to waste water
- Dissolving CO2, O2, Cl2, ozone into water
- Mix ground and surface waters
- Aerate drinking water
- Digesters mixed to promote ideal process conditions. Pre and post Digestion sludge holding tanks mixed to prevent stratification.
- Mix corrosive/hazardous waste on Effluent treatment plants.
- Blending effluent containing Glycol on Pharmaceutical process.
- Neutralization mixing duties using Phosphoric, Hydrochloric and Sulphuric acids on Water treatment.
- Municipal/Industrial sludge balance tanks mixed to prevent anaerobic conditions (optional atmospheric air entrainment to assist process)
Jet Mixer / Tank Mixing Eductor / Eductor Jet Mixer:
In-Line Eductor:
- Draining sumps
- Pulling an acid or base into a water stream for dilution purposes.
- To aerate a liquid to reduce the BOD (Basic Oxygen Demand) of the fluid.
- To inject air, ozone, chlorine or other gas into a process liquid.
- Activated Sludge treatment
Agitator :
- Chemical Addition
- Rapid Mixing
- Flash Mixing
- Coagulant Mixing
- Flocculation
- Activated Carbon Mixing
- Slurry Mixing
- Polymer Addition
- Equalization & Neutralization
- Anoxic Dentrification
- Anaerobic Digestion
- Chlorination